It is not surprising that we use a number of knives and bladed utensils for preparing our food on a regular basis, from a knife to a blender and even peelers.
When you are using the blade there are plenty of cases of accidentally injuring yourself while you are cooking. Cuts, burn and related injuries are very common in the kitchen.
According to the University of Nebraska safe operation specifies that “hand protection is important” when there is a potential risk of contact with sharp objects such as knives.
Although cut-proof gloves cannot fully eliminate the risk of getting injuries, they can reduce the chances that it will happen.
The anti-cut gloves can add an additional level of protection to your hand and fingers, and that is why it’s that much important to use gloves while you are cutting.
So make sure you read this guide till the end, as I have mentioned about cut resistance gloves, that will help you understand the gloves in a much better way.
Let’s get started!!
Do Cut Resistant Gloves Really Work?
Cut-resistance gloves are widely used in most kitchens to protect from knife injuries, cutting accidents, and lacerations.
These gloves can greatly eliminate the risk of getting injuries and also minimize the chances that it will happen. These gloves add an additional level of protection to your hand.
The primary reason why most chefs and workers get accidents and lacerations is that they do not take necessary safety precautions while using the tools.
Therefore exercising all the safety precautions can prevent all unwanted accidents. Cut-resistant gloves can greatly help you in protecting your fingers and hands from injuries.
Although cut-resistant gloves cannot eliminate injuries, they can minimize their injuries.
The gloves are specially made with a combination of fiberglass, stainless steel, and high-performing synthetic yarns, that are combined together to make the gloves.
Most chefs hesitate to wear safety gloves because they feel they are experienced enough, or they feel too uncomfortable to use them. Unfortunately, they get injuries or cuts.
Therefore cut resistant gloves are highly important and it’s always recommended to use cut-resistant gloves. The gloves can protect you from:
- Cuts
- Knife Injuries
- Cutting Accidents
- Lacerations.
It’s always worth it investing in a pair of cut-resistant gloves. Below I have listed some of the best cut-resistance gloves you can look into.
How Safe Are Cut-Resistant Gloves?
There are many cut resistance levels gloves that have been categorized according to different standards like the ISEA 105 standard and the ANSI standards.
The EN388 is a Europen Standard and this standard is being used throughout the world. Another one is the ANSI standard and which is only used in America.
Both of the standards are pretty good and both these standards are used to determine the resistance of the material such as kitchen cutting gloves.
If you are talking about cut-resistant gloves then they must be resistant to cuts, abrasions, and tears. In cut-resistance gloves usually, the rating of the gloves determines how the gloves are safe.
The more the number the stronger gloves are resistant to a particular hazard and they can protect you against cuts and puncture while you are cutting.
Usually, the cut-resistant gloves are measured and tested against four different hazards
- Cut Resistance: This will define how many cycles the gloves can handle until the gloves fail like slicing and cuts.
- Abrasion Resistance: This will define how many cycles the gloves can handle like the hard and the rough surface.
- Puncture Resistance: It defines how much force the gloves can withstand before the gloves are pierced to a standard point.
- Tear Resistance: This will define how much force the gloves can withstand before it gets torn or ripped off.
Usually, the anti-knife gloves are extremely safe and you can use the gloves to protect your hand. If you are new to a knife then cut-resistance gloves are extremely important to protect your hands.
Usually, the resistance of level 3 gloves and above is considered to be safe. Whereas level 5 cut-resistant gloves are safer than level 1 and these gloves are mostly used for mechanical purposes and other general-purpose.
Do Kevlar Gloves Protect Against Cuts?
Kevlar gloves have a unique property it has high tensile strength and it has resistance to high temperatures. Kevlar is mostly used in the automotive industry and in the aerospace industry.
Kevlar is also famous for being cut resistance and it can easily prevent cuts because of its strength and the tightness of the weaver.
These gloves are great for people who are using sharp tools such as knives and other tools such as meat cutter butcher knives.
Gloves that are made from kevlar are extremely abrasion-resistant and they can easily protect you against injuries from the knife or injuries caused by rubbing against rubbing the skin.
Kevlar gloves can easily withstand friction, so now you don’t even have to worry about cutting your fingers if you are using a kevlar glove.
Well, if you are looking for a kevlar glove then this is one of the best kevlar gloves you can find.
Are Leather Work Gloves Cut-Resistant?
Leather also has cut-resistant property and offers good cut and puncture protection. A leather glove can offer a good grip and protect you against impact and cuts.
If the task you are doing requires additional protection, then leather gloves are perfect for you. Gloves made from leather are widely used in industries and even in the wild.
There are many different types of leather that can use for making gloves.
- PigSkin: Gloves made from pigskin are washable and are more breathable than other varieties of leather. You can have to worry about water if you have pig skin knife gloves.
- CowHides: This is one of the most commonly used leather for making gloves. Also, it’s moderate price and offers good abrasion protection.
- Deer Skin: This leather skin is long wearable and is more flexible than cowhides. Gloves made from deerskin can be used for long-wearing.
- GoatSkin: Goat leather is perfect where dexterity is required. Goatskin usually contains lanolin and because of this, it makes waterproof and abrasion resistance gloves.
Leather has a good cut resistance property and is widely used for making gloves. However, it’s not recommended to use leather gloves in the kitchen as it’s not food safe.
Leather offers more protection and in fact, provides a better grip. However, leather is one of the least comfortable materials and some leather can cause irritation in your hand.
Also, if you are using leather gloves it’s difficult to wash as all types of leather are not washable. Also, the drying time of washable leather is quite high.
How Do Anti-Cut Gloves Work?
When you hear the word “anti-cut gloves” or “cut-resistance gloves” then what comes to your mind? You might be thinking of thick or chain mail gloves right?
However nowadays most of the cut resistance gloves are just the opposite, they are thin and are more comfortable, yet they are cut resistance. But how does it work?
When it comes to cut-resistant technology then there are three elements, basically, they are strength, hardness, and the rolling action, and they provide cut resistance.
When you look closely at the cut-resistant gloves then you will find that the gloves are made only from one yarn, but actually, it’s a three-ply yarn that has been engineered in such a way that it combines many elements together.
In a cut-resistance glove, there is a “rolling action” which means that the filament or the fiber can move loosely and the motion of the fiber absorbs the impact from the blade.
The gloves have the slipperiness property that helps the knife blade to glide over the fabric or the gloves rather than cutting through the gloves.
What Is The Highest Rating For Cut Resistant Gloves?
There are many varieties of cut resistance gloves according to the requirements and the level of cut resistance. As you know that every working environment has a different working requirement.
Generally, restaurants and homes require a lower level of cut resistance because they are only cutting and dicing vegetables. While a butcher may require a higher level of cut resistance as they are sawing through the thick meat.
That is why when you are getting yourself a cut resistance glove, you must first know your purpose because it’s the single barrier to serious injuries.
To test the gloves cut resistance, usually manufactures test through an agency known as American National Standards Institution(ANSI).
ANSI provides the cut resistance in grams. ANSI is mostly determined by how much actual weight is required to cut through a given material with a 25 mm blade travel.
New levels of cut resistance gloves range from A1 to A9, while the older level of gloves ranges from 0 to 5. The A9 or level 5 provides the highest level of cut resistance.
Level 5 cut resistance gloves are the strongest knife cutting gloves and these types of gloves are mostly used in most industries and the butches also use them.
Below is the table for the ANSI levels of cut resistant gloves that can help you when you shop for the best cut resistance gloves.
ANSI Cut Resistant Level: Total Grams Of Weight That Is Needed To Cut Through The Material
| A1 | Greater Then | 200 |
| A2 | Greater Then | 500 |
| A3 | Greater Then | 1000 |
| A4 | Greater Then | 1500 |
| A5 | Greater Then | 2200 |
| A6 | Greater Then | 3000 |
| A7 | Greater Then | 4000 |
| A8 | Greater Then | 5000 |
| A9 | Greater Then | 6000 |
Best Cut Resistant Gloves
Investing in good quality cut-resistance gloves is always worth it because they can help you in protecting your hands from cuts, scratches, and even heat.
When it comes to cut-resistance gloves then there are a number of options like leather gloves, kevlar gloves, and other types of safety gloves.
As there are many different varieties of gloves that are made for many different purposes, so sometimes it becomes very confusing to find the best one.
Therefore, I have the complete information in a single guide, on the different cut-resistant materials that are used for different purposes.
1. NoCry Cut Resistant Gloves
The food-safe cut-resistant gloves are made no cry and they are one of the leading manufacturers of cut-resistant gloves. They are made one of the best quality high-level cut resistance gloves on the market.
Also, the best part about the cut-proof gloves is they are 100% food safe and you don’t have to worry about using them in the kitchen.
The EN388 offers you level 5 cut resistance gloves, also the best part about the gloves is they are available in many different sizes for men, women, and even kids.
Also taking care of the gloves is pretty easy you can wash them in a washing machine using mild detergent and they dry them.
2. MaxiFlex Cut Resistance Gloves
If you are looking for expensive cut-resistance gloves, then this is the one that suits you the best. The cut-resistance gloves have a nitrile coating which is one of the best cut-resistant gloves materials that offer breathability and a good amount of reinforcements.
It provides an optimized grip because it has a premium black nitrile-coated palm and because of this, it provides a very comfortable grip.
It has been built from high-performance yarn and fiber that offers maximum cut protection. It’s completely built with federal regulations on food safety.
The level 5 cut-resistant gloves are one of the best gloves for chopping vegetables and will offer you maximum protection. Yes, it’s expensive, but it’s worth investing in the gloves.
Wrap Up On Do Cut Resistant Gloves Really Work
So, there you have it! A comprehensive guide on does cut resistant gloves really work. Everything that I have mentioned in the guide is very important and cur-resistant gloves.
Whenever you are getting yourself a cut-resistant glove then it’s always recommended to look for the tight weaver. Because you don’t want your gloves to lose and fall apart.
If the gloves have enough stretches then you can easily move your fingers and get a good grip when you are slicing. The gloves that I have listed are a good option and fit all criteria.
You must know that no gloves are completely cutproof, but the gloves only help in providing extra safety.
Level 5 cut-proof gloves indicated that it would take in-between 2,200 and 2,999 grams of pressure for a sharp object to cut through the gloves.
Therefore the level-cut resistance gloves are highly effective in protecting against cuts. When you are using heavy machinery you can always use level 5 or leather cutting gloves.
However, you must be aware that cut-resistant gloves are not necessarily puncture-proof, but these gloves are mainly designed to protect against the cutting motion and oppose the direction of direct penetration.
FAQ: Best Kitchen Cutting Gloves
Finding out the best cut-resistant gloves is tough, and that is why people ask a lot of question-related about it. That is why people ask a lot of questions and that can be solved easily. I have added some of the most commonly asked questions and answered them.
1. How Safe Are Cut-Resistant Gloves?
Usually, the protective gloves for cutting level 3 and above are safe for handling sheet metals. While the level 5 gloves are safe for handling glass and good for mechanics and other general-purpose.
2. What Is The Highest Rating For Cut-Resistant Gloves?
The new level of cut resistance ranges from A1 to A9, while the old ranges from 0 to 5. Either level 5 or A9 provides the highest level of cut resistance in the category of cut-resistant gloves. I have listed all the levels of cut resistance above and you can refer.
3. How Do You Choose Cut Resistant Gloves?
There are many different types of safety gloves for cutting available in the market and that is why it becomes very confusing. Therefore, while getting the gloves you must know your purpose then you can identify the level of protection you require.
4. How To Keep Cut Resistant Gloves?
You can clean your knife-proof gloves by using mild detergent or dish soap. If you are using gloves to cut food then you can generally wash the gloves by hand after everyday use. Daily washing of the gloves will keep the gloves clean and infection-free. However, it’s not recommended to use strong detergent to wash your gloves.